Month: March 2014

If you don’t want to have to resort to pest control, it is important to follow a series of simple steps based on hygiene and good storage of food in the home. There are a lot of animals that like to live near the man. From him they get food and shelter with which subsist, procreate and spread to its wide. Animals such as mice or cockroaches are seeking the proximity of humans, since in their homes can find a home with a good heating and an inexhaustible source of food. These animals often feed on waste, and human produce many. If you are not careful when it comes to storing waste, and left lying around anywhere, chances are these beings do not take to appear. Similarly, if the foods are not stored properly before being consumed and become waste, rodents like mice can reach them, make their way through their packaging and serve them not only to survive, but also to increase their offspring and aggravate the problem of pests in the household.

Thus, it must be said that the best method of pest control is based on prevention. Firstly, there to take care of hygiene. A good cleaning at home will mean that there will be no place for the waste. And the lack of waste constitutes a cut in the power supply of the pests of animals that plague home. Secondly it should take a few preventive steps basic when it comes to store food that has not been consumed. Between them would always keep them inside containers that make it difficult to access them, and maintain these vessels away from the ground, which is the place that easier access home pests.

The challenge for the control of pests in the home is of enormous significance. We must not forget that animals such as cockroaches and mice, which are multiplying between dirt, are carriers of potentially dangerous for human diseases and infections. Pests in the home are a very serious matter. If it affects a family, this must fight against them with all the means to her scope. Even with the help of professionals if necessary. Original author and source of the article

If you want to buy a rustic fireplace for your home you currently have two possibilities. The easiest is to go to any store specializing in the sale of rustic or decorative fireplaces where sell us the kit, which contains the components of the external structure (stones, refractory bricks and wood beam) and the home or insert depending on the type of fireplace. The second possibility is that you only buy the home or the insert and with a good DIY manual can make decorative structure to your liking. In the first case must follow several steps: well leveled soils where we will place the rustic fireplaces. Then we put with help of the bubble level base of the chimney pieces, it is how to make a single puzzle that a little more heavy. But thanks to the installation manual which comes included, there practically no doubt. The pieces are joined with refractory mortar.

Place the home or insert depending on the type of fireplace that we’re riding. This is the only time where we will need the help of another person by the high weight of the home. It is advisable, before place home, isolate heat wall of work with an insulating panel, which is composed of a layer of about 3 cm of thickness of glass wool, a layer of 1 cm thick of fiber ceramica(no en todos los modelos) and with a sheet of aluminum. The layer of glass wool is attached to the wall. This way isolate the wall allows reduce the temperature, which broadcasts home (approximately 400 c) at 40 C which prevents cause cracks and/or overheating of the walls. Mounted stone jambs, join them with the lintel made of refractory bricks and placed the wooden beam, which is usually of oak.

So we have the fireplaces kit rustic assembled and prepared for later connection to the flue duct and installation of the fireplace hood. In the second case we have that be a very ingenious and constructive bricoman with clear ideas about the type of fireplace rustic that we want to achieve, but with a proper DIY and knowledge manual zooms in on available local materials, will achieve it very easy. The only thing that we have to do, is manufacture decorative parts of our fireplace with refractory mortar using local materials in our area: refractory bricks or stones.Prepare the lintel on the floor to avoid the formwork. Once dry we placed it on your site. We can make Coronation beam with a trunk of oak or also with refractory bricks depending on the decorative style, which we want to achieve. The latter case is more work but gives us satisfaction of having a unique design into possible market fireplaces. Original author and source of the article